View Our Upcoming Classes
Upcoming ClassesTesting Equipment
ON-SITE & CUSTOMIZABLE
Proportional & Servo Valve Test Stand
Features:
- 24-volt power supply capable of 2.4 amps
- Configurable proportional valve amplifier to drive any brand of proportional valve independently from the amplifier card
- Independent Internal Command Signal Generator to drive valves with on board electronics (OBE)
- Accepts 32 or 48 pin amplifier cards of the 2 and 3 row type Euro-card format such as:
- Rexroth 2 row, 32 pin DIN 41612 type C
- Parker/Dennison and Bosch/Rexroth 3 row, 32 pin type F32
- Parker/Dennison and Eaton/Vickers 3 row, 48 pin type F48
- 32 and 48 pin cardholders are wired to individual banana jacks for easy patch cord connections
- Twenty patch cord jumpers are provided for various wiring connections
- DIN EN175201-804, 7 pin plug & cable for OBE valves
- Two solenoid-connecting cables with banana plugs on one end and 3-prong plugs (ISO 440, ANSI B 93.94M, DIN43650) on the other end to connect and drive a valve with or without feedback
- LVDT plug and banana plug cord to facilitate valves using a feedback device
- Two 5K-ohm potentiometers for varying the control (command) voltage (1K and 10K options available)
- Four SPDT switches for simulating set points, presets, etc.
- 6' 120-volt power cable, input fuse (1.8 amps) switch, and power on light
- Operation Manual
Weight: 18 lbs. (approx.)
Size: Length 18.5", Width 15", Height 7" Price: CONTACT FOR QUOTE
Universal Proportional & Servo Valve Electronic Tester/Trainer
Features:
- 24-volt power supply capable of 2.4 amps
- Configurable proportional valve amplifier to drive any brand of proportional valve independently from the amplifier card
- Independent Internal Command Signal Generator to drive valves with on board electronics (OBE)
- Accepts 32 or 48 pin amplifier cards of the 2 and 3 row type Euro-card format
- 32 and 48 pin cardholders are wired to individual banana jacks for easy patch cord connections
- Twenty patch cord jumpers are provided for various wiring connections
- DIN EN175201-804, 7 pin plug & cable for OBE valves
- Two solenoid-connecting cables with banana plugs on one end and 3-prong plugs (ISO 440, ANSI B 93.94M, DIN43650) on the other end to connect and drive a valve with or without feedback
- Configurable Servo Valve Driver capable of driving any Torque Motor Coils to +/- 200 mA - Comes Prewired for Series connection to the Valve with a 4-Pin MS3106 cord-set
- LVDT plug and banana plug cord to facilitate valves using a feedback device
- Two 5K-ohm potentiometers for varying the control (command) voltage (1K and 10K options available)
- Four SPDT switches for simulating set points, presets, etc.
- 6' 120-volt power cable, input fuse (1.8 amps) switch, and power on light
Weight: 18 lbs. (approx.)
Size: Length 18.5", Width 15", Height 7"
Price: CONTACT FOR QUOTE
Empowering You
With Training, Engineering, & Education
Request Your Free Quote
"*" indicates required fields
Ready to Empower Your Team with Expert Training?
For over 30 years, CFC Industrial Training has helped companies worldwide overcome technical challenges through expert hydraulic, electrical, pneumatic, and automation training. Our IFPS-certified instructors deliver on-site, online, and custom programs that reduce downtime and maximize equipment performance. Get started today.
Empowering Industry Through Expertise
For over 35 years, CFC Industrial Training has been a trusted partner in delivering hands-on technical training, engineering solutions, and cutting-edge education technologies. Serving industries worldwide, we specialize in hydraulics, pneumatics, electrical systems, PLCs, and multi-craft disciplines.
Our certified instructors bring real-world experience to every training session, ensuring that clients receive practical knowledge applicable to their specific operations. Whether it's on-site training tailored to your equipment, live sessions at our Fairfield, Ohio facility, or flexible online courses, we adapt to meet your needs.