Proportional Valve Test Stand

Features:

24-volt power supply capable of 2.4 amps
Configurable proportional valve amplifier to drive any brand of proportional valve independently from the amplifier card
Independent Internal Command Signal Generator to drive valves with on board electronics (OBE)
Accepts 32 or 48 pin amplifier cards of the 2 and 3 row type Euro-card format such as:
Rexroth 2 row, 32 pin DIN 41612 type C
Parker/Dennison and Bosch/Rexroth 3 row, 32 pin type F32
Parker/Dennison and Eaton/Vickers 3 row, 48 pin type F48
32 and 48 pin cardholders are wired to individual banana jacks for easy patch cord connections
Twenty patch cord jumpers are provided for various wiring connections
DIN EN175201-804, 7 pin plug & cable for OBE valves
Two solenoid-connecting cables with banana plugs on one end and 3-prong plugs (ISO 440, ANSI B 93.94M, DIN43650) on the other end to connect and drive a valve with or without feedback
LVDT plug and banana plug cord to facilitate valves using a feedback device
Two 5K-ohm potentiometers for varying the control (command) voltage (1K and 10K options available)
Four SPDT switches for simulating set points, presets, etc.
6' 120-volt power cable, input fuse (1.8 amps) switch, and power on light
Operation Manual

Weight: 18 lbs. (approx.)

Size: Length 18.5", Width 15", Height 7"