Trainers, Hydraulic Training, Online Hydraulic Training

Features:

 

  • Accumulators pre-charged to 250 PSI

  • 600-1000 PSI 5 GPM Variable Volume Pressure Compensated Pump with Load Sensing

  • 115/230 Volt Electric Motor

  • Manual 3-Position Directional Valve

  • Flow Meter For Circuits

  • 2x Linear Cylinders (1x with Load Spring)

  • Gear Type Hydraulic Motor

  • Direct & Pilot Operated Relief Valves

  • Sequence Valve

  • Pressure Reducing Valve

  • Pilot Operated Check Valve

  • Flow Control Valve

  • 3 Position 4-Way Pilot Operated Directional Valve

  • Flat Face Dripless Q.D.s

  • Cavitation Demo

  • Spare ISO-3 Subplate

  • Case Drain Flow Meter

  • Unloading Counter Balance/Brake Valve

  • 24 Hoses with Quick Disconnects

  • Toolbox with Pressure Gauge Tee

  • Heavy Duty Casters

  • Tabletop Shelves

  • Operation Manual and Sample Labs

 

Weight: 1200 lbs. (approx.)

Size: Length 52”, Width 31”, Height 64”

 

Price: $45,000

Trainers

 

 

Double Sided 

Hydraulic Trainer

Proportional Valve

Electronic Trainer

​Features:

 

  • 24-volt power supply capable of 2.4 amps

  • Configurable proportional valve amplifier to drive any brand of proportional valve independently from the amplifier card

  • Independent Internal Command Signal Generator to drive valves with on board electronics (OBE)

  • Accepts 32 or 48 pin amplifier cards of the 2 and 3 row type Euro-card format such as:

    • Rexroth 2 row, 32 pin DIN 41612 type C

    • Parker/Dennison and Bosch/Rexroth 3 row, 32 pin type F32

    • Parker/Dennison and Eaton/Vickers 3 row, 48 pin type F48

  • 32 and 48 pin cardholders are wired to individual banana jacks for easy patch cord connections

  • Twenty patch cord jumpers are provided for various wiring connections

  • DIN EN175201-804, 7 pin plug & cable for OBE valves

  • Two solenoid-connecting cables with banana plugs on one end and 3-prong plugs (ISO 440, ANSI B 93.94M, DIN43650) on the other end to connect and drive a valve with or without feedback

  • LVDT plug and banana plug cord to facilitate valves using a feedback device

  • Two 5K-ohm potentiometers for varying the control (command) voltage (1K and 10K options available)

  • Four SPDT switches for simulating set points, presets, etc.

  • 6' 120-volt power cable, input fuse (1.8 amps) switch, and power on light

 

Weight: 18 lbs. (approx.)

Size: Length 18.5", Width 15", Height 7"

 

Price: $4,640

​Features:

 

  • 110 volt to 12 volt DC Power Supply

  • Ignition System Simulator Circuit, including: Key Switch, Starter, Solenoid, and Engine Simulator

  • Forward, Neutral, Reverse Transmission Shifter

  • Throttle and Brake Simulator

  • Smart Sensors, Fuel Level Sender, Temperature Sensors, Oil Pressure Sender, and Universal Relays

  • Full Simulated Lighting and Indicator Circuits, including: Headlights, Taillights, Flashers, and Running Lights.

  • Other Options Available Upon Request

 

Weight: 80 lbs. (approx.)

Size: Length 38", Width 28", Height 15"

Price: $24,999

Truck Technology

Electrical Trainer

© 2020 CFC-Solar, Inc.

7042 Fairfield Business Drive

Fairfield, Ohio 45014-5480

info@cfcindustrialtraining.com

+1 513.874.3225

  • Facebook - White Circle
  • Twitter - White Circle
  • LinkedIn - White Circle
  • YouTube - White Circle