Proportional & Servo Valve Test Stand

 

Features:

 

• 24-volt power supply capable of 2.4 amps

• Configurable proportional valve amplifier to drive any brand of proportional valve independently from the amplifier card

• Independent Internal Command Signal Generator to drive valves with on board electronics (OBE)

• Accepts 32 or 48 pin amplifier cards of the 2 and 3 row type Euro-card format such as:

• Rexroth 2 row, 32 pin DIN 41612 type C

• Parker/Dennison and Bosch/Rexroth 3 row, 32 pin type F32

• Parker/Dennison and Eaton/Vickers 3 row, 48 pin type F48

• 32 and 48 pin cardholders are wired to individual banana jacks for easy patch cord connections

• Twenty patch cord jumpers are provided for various wiring connections

• DIN EN175201-804, 7 pin plug & cable for OBE valves

• Two solenoid-connecting cables with banana plugs on one end and 3-prong plugs (ISO 440, ANSI B 93.94M, DIN43650) on the other end to connect and drive a valve with or without feedback

• LVDT plug and banana plug cord to facilitate valves using a feedback device

• Two 5K-ohm potentiometers for varying the control (command) voltage (1K and 10K options available)

• Four SPDT switches for simulating set points, presets, etc.

• 6' 120-volt power cable, input fuse (1.8 amps) switch, and power on light

• Operation Manual

 

Weight: 18 lbs. (approx.)

Size: Length 18.5", Width 15", Height 7"

 

Price: CONTACT FOR QUOTE

​

​

​

​

​

​

​

Universal Proportional & Servo Valve Electronic Tester/Trainer

 

Features:

 

• 24-volt power supply capable of 2.4 amps

• Configurable proportional valve amplifier to drive any brand of proportional valve independently from the amplifier card

• Independent Internal Command Signal Generator to drive valves with on board electronics (OBE)

• Accepts 32 or 48 pin amplifier cards of the 2 and 3 row type Euro-card format

• 32 and 48 pin cardholders are wired to individual banana jacks for easy patch cord connections

• Twenty patch cord jumpers are provided for various wiring connections

• DIN EN175201-804, 7 pin plug & cable for OBE valves

• Two solenoid-connecting cables with banana plugs on one end and 3-prong plugs (ISO 440, ANSI B 93.94M, DIN43650) on the other end to connect and drive a valve with or without feedback

• Configurable Servo Valve Driver capable of driving any Torque Motor Coils to +/- 200 mA - Comes Prewired for Series connection to the Valve with a 4-Pin MS3106 cord-set

• LVDT plug and banana plug cord to facilitate valves using a feedback device

• Two 5K-ohm potentiometers for varying the control (command) voltage (1K and 10K options available)

• Four SPDT switches for simulating set points, presets, etc.

• 6' 120-volt power cable, input fuse (1.8 amps) switch, and power on light

 

Weight: 18 lbs. (approx.)

Size: Length 18.5", Width 15", Height 7"

 

Price: CONTACT FOR QUOTE