top of page
HANDS-ON & CUSTOMIZABLE
CFC training equipment foster tangible, hands-on skills.  Our training equipment can be fully customized to meet the training specifications of your facility, processes, and systems.  Specifically branded componentry can allow your team to interact with the OEM components they will use when on-the-job.  Having trainers on-site allow for rapid training of new-hires, and advanced troubleshooting opportunities.
Hydraulic Trainer Hydraulic Training Equipment Manufacturing Training Technician Training Hydraulic Training Electrical Trainer Mobile Electrical Trainer Electrical Training Equipment
proportional valve test stand.png
Proportional Valve Tester Automotive Training Training Equipment Training Equipment For Sale Hydraulic Equipment For Sale Hydraulic Training Equipment For Sale Electrical Training Equipment For Sale
Electrical Equipment For Sale Pneumatic Equipment For Sale Pneumatic Training Equipment For Sale Fluid Power Trainer Fluid Power Training Equipment Fluid Power Equipment

Double Sided Hydraulic Trainer


Features:
 

  • Accumulators pre-charged to 250 PSI

  • 600-1000 PSI 5 GPM Variable Volume Pressure Compensated Pump with Load Sensing

  • 115-Volt Electric Motor

  • 3-Position Manual Directional Valve

  • Flow Meters

  • Linear Cylinders with Load Springs

  • Linear Cylinders

  • Gear Type Hydraulic Motors

  • Sequence Valves                                                                                                            

  • Pressure Reducing Valves

  • Flow Control Valves

  • 3 Position 4-Way Pilot Operated Directional Valves

  • Unloading / Counter Balance Valves

  • 24 Hoses with Quick Disconnects

  • Toolbox with Pressure Gauge Tee

  • Tabletop Shelves

  • Heavy-Duty Casters

  • Operation Manual and Labs

  • Custom Wood Shipping Crate

 

Weight: 1200 lbs. (approx.)

Size: Length 52”, Width 31”, Height 64”

 

Price: CONTACT FOR QUOTE

Proportional & Servo Valve Test Stand

 

Features:

 

  • 24-volt power supply capable of 2.4 amps

  • Configurable proportional valve amplifier to drive any brand of proportional valve independently from the amplifier card

  • Independent Internal Command Signal Generator to drive valves with on board electronics (OBE)

  • Accepts 32 or 48 pin amplifier cards of the 2 and 3 row type Euro-card format such as:

  • Rexroth 2 row, 32 pin DIN 41612 type C

  • Parker/Dennison and Bosch/Rexroth 3 row, 32 pin type F32

  • Parker/Dennison and Eaton/Vickers 3 row, 48 pin type F48

  • 32 and 48 pin cardholders are wired to individual banana jacks for easy patch cord connections

  • Twenty patch cord jumpers are provided for various wiring connections

  • DIN EN175201-804, 7 pin plug & cable for OBE valves

  • Two solenoid-connecting cables with banana plugs on one end and 3-prong plugs (ISO 440, ANSI B 93.94M, DIN43650) on the other end to connect and drive a valve with or without feedback

  • LVDT plug and banana plug cord to facilitate valves using a feedback device

  • Two 5K-ohm potentiometers for varying the control (command) voltage (1K and 10K options available)

  • Four SPDT switches for simulating set points, presets, etc.

  • 6' 120-volt power cable, input fuse (1.8 amps) switch, and power on light

  • Operation Manual

 

Weight: 18 lbs. (approx.)

Size: Length 18.5", Width 15", Height 7"

 

Price: CONTACT FOR QUOTE

Universal Proportional & Servo Valve Electronic Tester/Trainer

 

Features:

 

  • 24-volt power supply capable of 2.4 amps

  • Configurable proportional valve amplifier to drive any brand of proportional valve independently from the amplifier card

  • Independent Internal Command Signal Generator to drive valves with on board electronics (OBE)

  • Accepts 32 or 48 pin amplifier cards of the 2 and 3 row type Euro-card format

  • 32 and 48 pin cardholders are wired to individual banana jacks for easy patch cord connections

  • Twenty patch cord jumpers are provided for various wiring connections

  • DIN EN175201-804, 7 pin plug & cable for OBE valves

  • Two solenoid-connecting cables with banana plugs on one end and 3-prong plugs (ISO 440, ANSI B 93.94M, DIN43650) on the other end to connect and drive a valve with or without feedback

  • Configurable Servo Valve Driver capable of driving any Torque Motor Coils to +/- 200 mA - Comes Prewired for Series connection to the Valve with a 4-Pin MS3106 cord-set

  • LVDT plug and banana plug cord to facilitate valves using a feedback device

  • Two 5K-ohm potentiometers for varying the control (command) voltage (1K and 10K options available)

  • Four SPDT switches for simulating set points, presets, etc.

  • 6' 120-volt power cable, input fuse (1.8 amps) switch, and power on light

 

Weight: 18 lbs. (approx.)

Size: Length 18.5", Width 15", Height 7"

 

Price: CONTACT FOR QUOTE

Truck Electronics Trainer

​Features:

 

  • 110 volt to 12 volt DC Power Supply

  • Ignition System Simulator Circuit, including: Key Switch, Starter, Solenoid, and Engine Simulator

  • Forward, Neutral, Reverse Transmission Shifter

  • Throttle and Brake Simulator

  • Smart Sensors, Fuel Level Sender, Temperature Sensors, Oil Pressure Sender, and Universal Relays

  • Full Simulated Lighting and Indicator Circuits, including: Headlights, Taillights, Flashers, and Running Lights.

  • Smart Sensors, Fuel Level  Sender, Temperature  Sensors, Oil Pressure  Sender, and Universal  Relays

  • Other Options Available Upon Request

 

Weight: 80 lbs. (approx.)

Size: Length 38", Width 28", Height 15"

Price: CONTACT FOR QUOTE

bottom of page